2008-2013 Cadillac CTS Greaseable Control Arm Bushings

***** WILL NOT FIT ALL WHEEL DRIVE CARS *****

The factory Cadillac control arm bushings are a common problem on the second generation CTS and are also known to fail prematurely. Additionally, the OEM control arm bushings are soft and allow deflection which in turn creates less than desirable handling characteristics. Replace those less than desirable OEM bushings with our polyurethane bushings and enjoy better handling.

The design of our control arm bushings as well as the hardware allows for grease to be pumped into the bushing for increased longevity. Furthermore, the grease also helps keep the bushings from squeaking. We suggest you grease these bushings every oil change.

We offer our own formulation of grease for use with our bushings. You can view that grease here – https://creative-steel.com/shop/mercedes/slk-class/slk55-05-10-r171/cs-14oz-polyurethane-grease-tube/

Installation instructions can be found on our website under support or you can view them here – https://creative-steel.com/wp-content/uploads/2019/10/09-15-CTS-V-V2-Installation-Instructions-Torque-Specs.pdf?swcfpc=1

Front upper control arm utilizes 4 polyurethane bushings (2 bushings per arm)

• Bushings in your choice of hardness
• Stainless plates
• Greaseable bolts with flat washers

Front lower control arm utilizes 8 polyurethane bushings. (4 bushings per arm due to split bushing design)

• Bushings in your choice of hardness
• Stainless plates
• Nordlock Washers for head of bolt and nut (2 per bolt)
• Greaseable bolts

Our polyurethane control arm bushings for the Cadillac CTS are available in two hardnesses-

• Daily driver black – Stiffer than the OEM rubber bushings, meanwhile retaining the OEM bushing NVH (noise, vibration , harshness).
• Race red – Substantially stiffer than OEM rubber bushings. These bushings are for customer that races or tracks their car. Increase in NVH levels are imminent.

** NOTE- when ordering lower bushings in daily hardness, you will receive the 2 small lower bushings in red hardness**