2016-2019 ATS-V Shifter Bushings

Shifter Bushings (Linkage)

Our ATS-V shifter bushings (Linkage) are a 3-piece kit replacing the OEM plastic bushings for the 16-19 Manual ATS-V shifter. If you have side-to-side or fore-and-aft play while in gear your bushings are bad.

The OEM shifter base has a thermoplastic bushing.  Under heavy shifting, this bushing usually fails.  We have replaced this with a bushing made out of bearing bronze that will not oval out prematurely.

The OEM bushings at the transmission end of the shifter linkage are also made out of a thermoplastic that also cause play once they wear out.  We replaced these bushings with machined Delrin, giving the best compromise between wear and noise reduction.

 Shifter Bushings (Support Bracket)

These ATSV shifter bushings (support bracket) are a direct replacement for the factory rubber bushings. These install on the front of the cast aluminum bracket that holds the shifter to the transmission.

Made out of Delrin not rubber. These are the best compromise between wear and noise reduction while also eliminating play in the shifter.